The ALMEX System - B M S

Features on the BMS Press

1. UNIQUE HINGING UPPER FRAME

   • full access on all three sides of lower platen. Ideal when fabricating specialty profiles since mold pates can be readily changed, cleaned or reloaded.

   • accessibility also means the BMS is suitable when special forms are required.

    

2. TWO TYPES OF PLATEN CONSTRUCTION OFFERED

   • steel platens offer the maximum in durability and provide the optimum finish.

   • aluminum platens are available when a smooth finish is not critical (i.e. with molds, etc.). Aluminum also requires on-half the energy to heat when compared to steel platens.

    

3. PRESS DESIGN PROVIDES LOW COST INSTALLATION

   • full weight of press in evenly distributed over two steel girders running the complete length of the press.

   • the BMS can be shipped in on piece complete, Assembly time on site, plus shipping costs are substantially reduced.

   • the press can be located anywhere in the factory on a standard concrete floor. Since structural modifications are not required, subsequent relocation is easily achieved.

    

4. INTERLOCKING FUNCTIONS

   • all press functions are interlocked for maximum safety. Hinged upper frame is hydraulically pinned when in the open position.

   • operator error and product damage is minimized.

    

5. FULL INSTRUMENTATION

   • all hydraulic, temperature indication and time functions are controlled from a centrally located control panel.

   • pneumatic controls are press mounted.

    

6. VARIOUS HEATING OPTIONS

   • steel platens can be heated with steam, hot oil or electric calrod heaters.

   • aluminum platens can be heated with steam, hot oil or electric blanket heaters.

   • membrane presses can be heated with hot air heaters or infrared heaters.

What are people saying about the Shaw-Almex System?

Contact us for more info